Curved Wheel Rim Striping Stickers/Decals Tape roll with applicator for Motorcycles (& Car) Fits 20" Wheel - 5mm - Reflective Red (2189-031)

Product Description

This wheel striping comes with an applicator. This applicator makes placing the rim stripes a whole lot easier! The applicator can be used on any size rim, the length of the sticker roll is enough to cover a 20 inch wheel. This set provides for two rims (both sides), and therefore provides your entire motorcycle with rim striping. You can order rim striping in two widths: 5mm or 7mm.

PREPARATION
Alswys make sure that the rim edge where you paiste the sticker is clean and free of grease. Make sure that the wheels can rotate freely, for example through placing the motorcycle on paddock stands. Do'nt paiste the stickers in a cold environment or on a cold subsoil; the glue won't attach well.

THE SET
Each set comes with a 5mm or 7mm applicator, depending on the rim stripe size of your choice. Each set contains a rim stripe roll and an applicator.

STEP 1
Cut enough striping of the role to cover one rim side. For this 17 inch rims this is 140 cm, for 20 inch rims this is 170 and 175 cm.

STEP 2
Push the striping through the applicator and remove the paper from the striping at the start. Bend up the striping, and pull it back over the applicator.

STEP 3
Press the applicator to the edge or the rim and apply the striping to the rim by either holding the applicator still and rotating the wheels by hand, or by pressing the applicator along the edge of the rim.

STEP 4
When you completed one rotation, cut of the striping. Both applying the ends of the striping close to each other and applying one end over the other is possible.

STEP 5
Repeat the previous steps on the other three rim sides.

STEP 6
Take a few steps back, look at your motorcycle and enjoy the fantastic result!

• RIM STRIPING APPLICATOR SET: One set rimstriping applicator provides rim stripes for both sides of both wheels with a maximum rim size of 20 inch. Each set comes with a 5mm or 7mm applicator, depending on the rim stripe size of your choice. Each set contains a rim stripe roll and an applicator..
• TIP FOR BEST RESULT: To improve adhesion: directly after apply the striping, shortly heat it with a heat or hair dryer. Do'nt paiste the stickers in a cold environment or on a cold subsoil; the glue won't attach well..
• PRE-APPLICATION PREPARATION: Alswys make sure that the rim edge where you paiste the sticker is clean and free of grease. Make sure that the wheels can rotate freely, for example through placing the motorcycle on paddock stands..
• WARNING: The glue of the sticker is not directly cured and needs about 24 hours to attach to the rim. So after applying, leave the sticker for 24 hours to 36 hours without tampering..
• 100% GUARANTEED SATISFACTION: We always value our customer and always try our best for customer satisfaction. If you prefer a size or color that is not available in this kit, please let us know!..