Fityle Replacement Fabric Cloth for Zero Gravity Chair,Patio Lounge Couch Recliners 63x17inch - Rhombus- Grey

I like the replacement. I did not use the top holes on my chairs. It was hard to figure out how to insert the top of the fabric. What I did was to cut in the middle of the iron rod in order to insert the fabric. Once inserted all of it to one side, I used a piece of 3/4" pvc ( long enough cover both sides of the separate cut iron rod), making a cut along the edges to make sort of a clamp, using pliers to insert, so the edges do keep together. Then, move the fabric covering the top of the rod. I was happy with the result. My chairs look like new.

Docked one star for the long ship time and another for not solving the issue of getting the fabric on the top of the frame. Overall, it's debatable whether getting this fabric and new bungies and getting it all on the frame is worth it vs. just getting a new chair, especially if, like mine, your chair was a $50 cheapie in the first place. If it was a $15-20 kit w/ bungies, in stock, with the top frame issue solved, it would make more sense.The "cleanest" options for getting the fabric on the frame are full disassembly (pop the chair rivets, slide the fabric on the frame, put in new rivets or other fasteners) or ripping the top seams on the fabric and adding grommets. Both add more parts (depending what you have lying around), more time, and make the whole thing more of a project, which might be a pro or con depending on your outlook.You can see in the pic, I went with duct tape and spare parts, possibly to be replaced with grommets down the line. I reinforced the corners with black duct tape, stabbed holes with an X-acto knife, and used the least-rotten of the old bungies to tie the corners down to the top grommets. The manufacturer could have made this easier any number of ways, but more grommets would probably be the simplest and most cost-effective.

I have had this chair about six years and it’s been very good but I will probably have to replace this lining again within six months to a year because It’s way thinner and not as wide as my previous one and it is not long enough after I took the time and threaded it now I’ve got to undo it and start from the top but it still will not be long enough about 4 inches too short

I used it to improvise a little with my patio swing because I only had the tubes (my cat ripped the fabric for the seat and back) and it's a great substitute for it, worked very well!!! Plus I didn't had to buy a replacement to disarm the whole structure of the swing.

I took off one star for the month+ delivery time. The second star was taken back because the fabric is almost an inch narrower than the 17” they claim. It is also difficult to install because the top needs to be threaded over the frame which required drilling out the existing snap screws and replaced it with my own. Velcro would be move convenient. The fabric also has a weird sheen that makes it feel almost sticky. It’s on now. We’ll see how long it lasts. Buyer beware.

works like it is supposed to!

Worked great. Very pleased with purchase.Some advice for anyone purchasing, you can reuse the existing bungies if in good shape, just unravel don't cut them off.You will need also need look at how the recliner is built. Most likely you will need to pop out a river on either side an replace with a bolt and washers. Added a pic for detail.

I like the mesh material, however replacement elastic bindings are not included and must be ordered separately. The replacement material comes from China and delivery is 2-3 wks. The fabric has a loop for the top rail of the chair, but unless you disassemble the chair, there was no way to attach the replacement material at the head of the chair (which is a solid bar). Had to punch numerous grommets along the top of the fabric and then wrap around and attach with additional binding to hold in place.

pareil à l'original pour la grandeur

Very sturdy but great job for replacing existing sun chair cover