ESR for MagSafe Sticker 360, MagSafe Ring Magnet, 2 Pack Magnetic Ring, Universal Magnetic Wireless Charger Conversion Kit for iPhone 16/16e/15/14/13/12/11, Galaxy S24/S23/S22 and More, Black

I'm using this in ways it says not to, so grain of salt here, but it works perfectly for me.- I'm using it on a Pixel 9, not an iPhone or the listed Samsungs. Since there are no templates included for the Pixel 9, I had to play around with placement for a while before I was comfortable that it would work for charging. I eventually found that one of the Samsung templates did actually place it very close to where I needed it, but that was only because the alignment adapter didn't fit all the way into the charging port as intended. See the photo for what I mean. But as long as you "practice" placement first to find the best spot, it can work on other phones not listed. (I recommend placing the ring on your magnetic charger [magnet to magnet, just as if it was already attached to the back of the phone] and then moving the phone around on top to find the best spot before sticking.)- It adhered very well but I'm using it on a vinyl skin, not a case. So there's less interference but it could also be less durable since it's only as strong as the skin is. It's held up for the few days I've had it installed but if anything changes, I'll update, though I wouldn't fault the ring for that since I'm not using it as instructed.- The magnet is very strong. I use a magnetic wallet and it attaches much, much better than the Magsafe MOUS case I had on previously. That was strong enough not to lose the wallet but I could remove it quite easily myself. With this, the wallet isn't going anywhere and it takes quite a lot of force to remove it for charging.- It's super thin and light but holds well. I got white and it looks nice, even though it's obvious. I don't anticipate needing the second one unless something happens to my skin and I need to replace that, but glad to have it as a backup.All around very much recommend. And for what it's worth, I realized I own 2 other ESR products—the 3-in-1 travel charger and an iPad case—and both are great and very high quality. So I'm now on board with this brand at this point. We'll see if that continues.

I’ve been using the ESR MagSafe Sticker 360 Ring Magnets for a few weeks now, and they’ve made a noticeable difference in my phone setup. I, personally, chose to try these out for my phone due to the VERY THICK case I use (something to do with a "box" of "otters") preventing the phones built-in MagSafe from being usable.Pros:• Strong Magnetic Hold: The magnet is surprisingly powerful and holds my phone securely on all MagSafe accessories—even in the car.• Wide Compatibility: Works perfectly on cases or devices without native MagSafe support.• 360° Alignment: The ring design helps with precise alignment, so accessories stay centered.• Easy to Install: Clear instructions and alignment guide included made setup simple and quick.• 2-Pack Value: Great to have a backup or one for another device or case.Cons:• Adhesive is VERY Strong: Once placed, it’s not easy to reposition. MAKE SURE you get it right the first time. (Half Pro, Half Con?)• Slight Bulk: Adds a bit of thickness to your case, but nothing too noticeable.• Finish Can Show Wear: After a few weeks, the finish on the ring shows light scratches.Overall, this is a fantastic solution if you want to bring MagSafe functionality to a non-MagSafe device. ESR did a great job with quality and usability. Definitely recommend!

I use these for all my Samsung phones to make them compatible with wireless charging battery banks. Works perfectly with my ugreen 10kmah wireless charging power bank. If I had to guess its like 10lbs of force holding capacity. Like I legitimately have to pull on the battery pack for it to come loose. Ive bought them multiple times now. Highly recommend for android phones without magsafe functionality.

I wish it came with alignment options for more than Samsung or iPhone, like there aren't plenty of other phones out there (Pixel user myself), but it worked anyway, and for the price of 2, you can't complain. They stick well to my semi-soft clear rubber case and I have used it for both a wireless charging pack and a car phone magnet with no issues. I think they're a good choice for the price for sure and I would buy them again

I have mine on one of the Casetify Impact Cases (the kind with the clear more plasticy back, not the more rubbery matte black kind) and after 2 months it's still just as secure as day 1. Its also super thin compared to all the other ones I've tried. Im currently using the white one and it has gotten a little scratched up but I honestly expected that. It works great with my magsafe wallet and car mount. I cant speak on whether or not it'll damage the case underneath once removed but I assume it may only because its stuck on there so well that I can't even get an edge to lift up no matter how hard I try. I highly recommend this one over others I've tried. I dont think you'll be disappointed at all.

I was scared they won't stick to my case since it's a little rugged but it turned out well, sticked to the back of my case been testing it for some weeks now

I initially doubted its capacity to securely hold my Z Fold 5 on my car charger, given previous experiences with ring mounts where the adhesive failed, proved insufficiently strong, or was excessively thick, such as the one purchased at Walmart. However, this particular mount exhibits exceptional adhesive strength, reliably securing even foldable phones.

Don't know if this is designed for the iPhone 16 Pro max. I saw on the 16 listed on the product page, however, the guide that comes with it does NOT list that model and only goes up to the 15. Not sure if the 16 is the same location placement or not but that should have been clarified. The other issue is when I tried to open up the install guide from using the QR code on the package, it said "file not found". I suspect what I received is a knock off. The model was 2Z525.