TEAMGROUP T-Force Xtreem DDR5 Ram 32GB (2x16GB) 8000MHz PC5-64000 CL38 A-DIE Desktop Memory Module Ram for 600 700 Series Chipset XMP 3.0 Ready Black - FFXD532G8000HC38DDC01

I was very pleased with the performance of these DIMMs. Using an Asus Z790 Apex Encore, I was able to boot at 8400 (benchmark stable) and hit a stable 8200 with loose TREFI on the default 1.45 volts. I settled on using a tight, stable ddr8000 with high TREFI and low TFRC for 24/7 use on air.Like most ddr8000+ from any vendor, I had to play with MC voltage and find the SA sweetspot to get 100% stable, but that's more a product of the memory controller than the DIMMs themselves and so no stars removed. This is very forgiving memory all things considered.The heatsinks are fully functional and better than most. I have a DIMM waterblock from Alphacool that I ended up not using on these, as I am not getting over 49c during memory stress runs with secondaries set. They look extremely high end as well, and I would have felt bad letting them sit in a tub of paint thinner.

Best Hynix H24M die kit out there. If you have the proper motherboard and memory controller, you will love this kit. I managed to get 8400c38 fully tuned on this kit at only 1.45v, and can probably go even lower. The same OC took 1.57v Corsair sticks, so they are definitely binned. The heatsinks are also very beefy and they run about 13C cooler than my Corsair kit.This kit, along with any kit over 7800mhz is not for beginners and may not be plug and play. You need a top tier 2 dimm motherboard like an Apex, Tachyon, Z790i Lightning, etc. If you know what you’re doing, you’ll love this kit. Ignore any reviews that talk about “instability”, this kit is perfectly stable at stock xmp.

I was looking for something NON-RGB, who cares about RGB? Seriously tho. the job of memory is not to make colors. Every penny of quality needs to go into the purpose of being memory!This was not even recognized by the board at its default settings until I turned on the Intel XMP profile. but then it was seen as 8000+ not 8200. Anyways, doesn't matter, because the system was not stable with the default speeds on.Pulled this memory, put other memory in, and BAM, system works again,

I did not find the product lived up to the advertised claims. I am an experienced overclocker and I purchased this with the idea of it being an upgrade to my existing SK Hynix A-Die modules and it was the exact opposite. I was a downgrade and the modules would not even function without error using the default XMP profile. My efforts to tune away the errors through minor changes to voltage and timings did nothing to change the errors. Oddly enough, my original modules pass the same memory tests without error using the saved XMP profile from these modules. Apparently they missed a step in the QC process and sent me a defective kit. Unfortunately, they were unusable for the intended purpose for which they were purchased and could not be used as advertised. They could not even be used as provided, so I returned them for refund.

Not much to say.Paired this with an Asus Apex Encore and 14900ks. Enabled XMP, passed Kahru 24h test. This is a great kit.