Furrion Vision S 7 Inch Wireless RV Backup System with 1 Rear Sharkfin Camera, Infrared Night Vision and Wide Viewing Angle - FOS07TASF, Black

Used for a long trip. Were gone 6 weeks . It got used alot and worked well. You do need to remember to put on headlights to make it work

I installed this in about 10 minutes on a Rockwood Roo, but the Roo was prewired for the camera. If your rig isn't prewired, there are extra steps you will need to take to make this work for your setup but those are outlined in the install instructions. For the prewired Roo, it already had the black fin plate attached to the back of the rig so I didn't have to drill or caulk anything and honestly it took more time to lug out the ladder than it did to install this whole setup.The first step is to pair the camera with the monitor, which was pretty easy. Plug in the monitor to the cigarette lighter/adapter in the car, then plug the camera into the split wire connection (the monitor power wire has a split connection that you plug the camera into), turn the monitor on and it pairs. You may have to hit the menu button on the side of the monitor and select pairing, but the whole process was very simple.Second step was to install the camera. On the Roo there is a black attachment at the top of the back of the rig that looks like the case the camera is in but without the camera. Essentially you remove the camera from the factory case and mount it in the case already on the rig, which is very easy. On the RV case there is a small plate where the camera mounts which is held on by 4 screws, just unscrew the plate but don't lose the screws because they are very small. Then remove the camera from the case it is installed in and plug the camera into the wire preinstalled in the rig, push the wires back into the case on the rig, then attach the camera with the 4 screws. It is really very easy if your rig already has the black fin case already attached.Finally, adjust the camera to the angle you want and you are set.The monitor attaches to a suction cup which then attaches to your windshield. The monitor plugs into the cigarette lighter/adapter for power. I added a small velcro strap to the wire to bundle it.Overall it has excellent picture quality and is very easy to install and easy to adjust the camera angle. You just "click" the camera up or down by moving it and it stays in place. It does not move at all even when going over rough roads.I used it while driving and had no issue with picture loss and everything was real time. I could see cars coming up on either side of my rig without having lag issues. Also I did not have to "mirror" the image. Cars coming up on the left appeared on the left of the screen, cars on the right appeared on the right, no problem at all. You would just have to double check your connection to see if you would need to mirroe the image.Now for the "CONS". The monitor and the power cord. I hate cords hanging all over the place and this cord is long. I just used a velcro strap to bundle the excess wire and it seemed to work fine but because they used a bulky ciagrette lighter type adapter plug, it stuck out and kept getting in the way until we got use to it being there. I wish they would have thought about using a USB cord to power the monitor because then I wouldn't have had the huge adapter getting in the way. Honestly though, that would be my only real complaint.Overall the camera and monitor are an excellent addition to my rig. My only suggestion or recommendation to Furrion is to work on making this iphone/android compatible so that the monitor setup could be replaced using a phone or tablet. But again, this is a great setup for my rig.

I recently purchased a new trailer that came with a backup camera installed. Unfortunately it was almost impossible to get the camera to operate without the software dropping and when it did the image quality was of very poor quality. After research I found that the Furrion Vision 5 received excellent reviews.Setup could not have been easier, even though I had to replace the old camera mount with the new one and clip and connect the new wires to the power source. Picture is amazing on 7" monitor and did not drop out on my short test run. Makes backing up a 5th wheel so much easier and being able to see behind the trailer when on the road is great peace of mind. Sure there were some minor negatives, especially the fact that the mounting screws in the kit were not as listed in the installation manual but a quick trip to Ace fixed that. Extremely satisfied!

Fonctionne très bienExactement ce que j’ai commandé

This was so easy to install and set up. Did it in about 30 min. Picture quality is awesome.