BANVIE Car Alarm System, Security Antitheft Alarm Systems with Keyless Entry, with Microwave Sensor & Shock Sensor

Works great, not too hard to install

Super recomendable, a mi papá le encanto

Everything arrived as advertised. Key fobs felt like good quality. Everything worked well out of the box. Installation as tricky. The wiring diagram was vague. Took some testing with a test light to confirm some of the circuit functionally before connecting.A few notes to help others:- The “door trigger” is the feedback from the doors closed. If the feedback is providing 12V+, wire that to the BLUE wire.- I have seen that YELLOW is commonly used for the accessory power on other alarms. In this alarm, you will wire accessory power to the WHITE wire.- Both of the BROWN wires provide 12V+, wire one or both of these to your lamps. The diagram makes it look like a closed loop between both brown wires, that is not the case.- The lock and unlock outputs are dry contacts in the module that either switch power or ground. The important thing to realize here is that you need to supply the switched power or the ground. The alarm does not use the module supplied power or ground. There are a couple of legitimate wiring diagrams clarifying the wiring to the lock/unlock actuators, but the main wiring diagram is very vague.

Simple the best

Alarm is at a great price. I do notice that once car battery gets below a certain voltage; alarm will activate simultaneous alarm sound.

I don't like writing bad product reveiws, but this is complete garbage. Save yourself the headache, Spend a little more and get a decent brand name with a good reputation. I literally ripped it out and threw it in the trash. See pics.Pros: None, it realy is that bad.Cons:No install instructions and the 1 page parts list was poorly translated to English. Who proof reads this stuff?The wiring was ridiculous, especially with no instructions.The alarm will not program. So it locks itself after 25 sec.The siren is weak, my dogs howl louder than this.

The alarm for its price is just super. Those who write about thin wires, I can answer - on all alarms, the wires are standard. I have installed a lot of alarms in my life, and I can say that the alarm is normal for its price. Yes, I had to tinker. But having a multimeter and tools on hand is not difficult. The only thing is that to connect the trunk actuator, I had to buy a relay. But in general, everything is great.

Works very well good range to activate with remote. Alarm horn can be heard inside my home, with windows shut. Instructions are pretty much none existent. Good wiring schematic if you have experience with wiring and mechanics it's not that hard. You have to think about placement of sensors and ecu unit as plug an play wiring is short. All install wiring is color coded and if one just follows this it will work for you.