CO-RODECO RODE 8 x AA 12V Battery Holder Case Box Wired ON/Off Switch w Cover Pack of 2

I received the product with a lot of surface scratches and one of the two with broken a plastic catch.

Its Good and easy to customize according to amount of batteries.

Worked fine. Good value for 2 of them.

Battery packs arrived to Canada 3 (!!!) business days after purchase, exactly as advertised and well packaged. Incredibly impressed.

it does the job.

I use these to replace the heavy 12 volt batteries in my portable fish finders. They are a lot lighter and the factory batteries are a lot cheaper and lighter when portaging my stuff. This is the second time I have ordered them.

This worked out perfectly for my project. I had two lamps in my living room and i didn't want to run extension cords across floor. I took to the internet for ideas. Also this worked out very well because we lost power during hurricane Irma and this made my project worthwhile.1. Purchase 8x AA 12v Batter case holder (8-AA = 12Votls = enough to power one of the bulbs). *see #3*2. Purchase 30 pack AA Duracell Quantum batteries (they claim longest life of batteries)3. Purchase Chi Chin lighting bulbs (12V led bulb - 7 watts 500 lumens G50/E26/E27/)4. Lamp (To make battery powered since I didn't want extension cords all over floor or under carpet)5. Wire cutter/stripper6. *Soldering Iron and Solder (*If wires not soldered good - depends some battery holder cases are poorly soldered).7. Razor blade8. Electrical tape9. 3M Velcro picture hanging strips (to attach battery holder case in a place people will not see).Find a lamp, screw in the Chi Chin 7 watt bulb. then use your wire cutter/stripper and cut the plug end of the lamp cord. Strip the end of the wires (maybe 1/4" or less) and separate the lamp wire you just cut the plug end off into two separate wires with a razor blade (pull wires apart about 3"inches in length) for this project it does not matter which stripped and split wire from lamp to connect to the battery holder box red or black wire. just connect one wire to red and one to black. Insert your 8-AA batteries in the holder box close lid (online said you can use an eyeglasses repair kit screw to keep box closed or tape shut (so it doesn't come loose). now turn on the light switch and you now have a lamp that lights up as if it was plugged into a socket. ***side note, leave the battery pack switch ON and use the lamps On/Off switch to control the power to the light*******I did this to solve the extension cord across the floor/under carpet issue but due to Hurricane Irma, we lost power and this worked perfectly. Because the bulbs only use 7 watts with the Duracell Quantum batteries this thing can last for a long time. We had these in use for over 10 hours and running strong.I have added pictures to see it setup and how i hid the battery pack. My neighbors now asking me to show them how to make this or make it for them.