3MPPS (Original Series) Paint Spray Gun Cup Lids and Liners Kit, Large, 28 oz, 200-micron Filter, Use w/ Paint Gun for Cars, Furniture, Home, 25 Disposable Lids and Liners, 10 Sealing Plugs, Factory

The large 28 oz cups and 200-micron filters ensure smooth, precise painting. The 25 disposable lids and liners make cleanup easy, and the sealing plugs work perfectly.

I use these along with a Fuji T75 / Q5 Platinum. Works great with BIN primer and latex paints, they are reusable on the same job. I also have stored paint in them for a month or two and then reused them with a new filter top. They are well designed and really cut down the cleaning time. Although pricey they are amazing and I have yet to have a clog with my gun using them. Another cool thing you can do is fill one with cleaning solutions and just spray your gun for a few seconds if you need to leave it overnight, works great. I use both the large and medium sizes depending on the job.

Does what's it's supposed to!

I debated going with this system, but after spraying epoxy and 2k primer on my fenders, hood and trunk lid and having to spend a good amount of time cleaning the gun afterwards, especially the cup, I decided I needed to try this system and I am glad I did. And, I am glad I went with the Large cup as it's just the right size for me and holds more material, which minimizes the use of liners. If I knew about this system when I purchased my spray guns, I would've purchased them without the cup and used the savings to purchase this kit.I epoxied my doors today and when I cleaned the gun, I literally just used maybe a couple ounces of Acetone - just a couple fills in the gun until it ran clear and then sprayed some Acetone through the gun the with air line attached. I kept thinking that I'm missing something, so I tore the gun down to be sure and it was clean. It took way less time and material (i.e. Acetone, rags etc) cleaning with this system. I just tossed the liner and was done.Unless something weird happens, I won't be going back to using the regular cups. For now, I am sticking with the 3M PPS system. I highly recommend this system, even if you don't paint often. It's worth it's weight in gold. Less time, less mess.

I ordered these UPS but the cup con e ter is differentbecause I thought they were your standard PPG C

Any reviews saying they leak are from inexperienced painters. The 1.0 PPS cups have always required you to be absolutely sure the lids are all the way snapped on the cup before screwing the black ring on. If you double check and secure the ring on it will never leak.

Came in 3M box and correctly packaged but all the liners are manufactured incorrectly and will leak.Looking directly down at the lip at the top of the liner, the lip was not the same width all the way round. At one point it was narrower, this is where the paint will leak from. The liner sits inside the mixing cup with lid clipped in place but it seals the paint inside with the collar that is screwed down that tightens the lid to liner top lip, which in my case was mostly missing.I had also purchased 16325, these were molded incorrectly as well and dripped paint on my work before I caught it. Both sets were returned for credit.I purchased the same kit at my local paint supply shop and these cups were manufactured correctly and did not leak.Check the cups when you receive them that are ok for use.

This is a great addition to the Fuji spray unit. Using these with the 3M PPS cup saves a lot on clean up, and the frustration of dealing with the Fuji bottom feed cup not pressurizing. You can even use the 3M cups to spray upside down.